Adcom URC-200 Universal Remote User Manual


 
The bottom of the display flashes ”PUNCH TO”.
Press the device button for the device that doesn’t
have volume control commands yet (i.e.,DVD).
This is the device you are going to PUNCH TO for
the volume and mute commands.
Note: If you wish to PUNCH to the MAIN device, press
the POWER OFF button at this time.
The bottom of the display will then flash “PUNCH
FROM”. Now you select the device that has the
volume commands you want (i.e.,TV for systems
using the TV speakers, AUDIO for systems with
surround sound receivers). The bottom of the
display will flash “SAVED”.
Repeat steps 3-5 until all your devices operate the
volume perfectly. Press the MAIN button twice to
return to normal operating mode and test your
Punch Through settings.
Note: The Punch Through feature is not limited to
volume and can also be applied to channel or other
functions. If you find yourself switching to a particular
device frequently to use a group of controls, consider
using Punch Through for another group, as listed here:
VOL - Volume Up, Volume Down and Mute
CH - Channel Up, Channel Down and Prev. Channel
PLAY - Play, Stop, Pause, Rewind and Fast Forward
VOD - Guide, Menu, Info, Exit, Up, Down, Left, Right, Sel
POWER - Power On and Power Off
14
The Automator
4
5
6
Select
the Device
you want to
“Punch To”