Adcom URC-200 Universal Remote User Manual


 
Overview of Erasing
You can erase an individual button with a learned
command, a macro or a favorite channel. You can
erase an entire Device’s learned command or macro
buttons. You can also erase ALL your learned com-
mands on all devices or all your macros or favorite
channels everywhere.
If you really want a fresh start, it is possible to reset
everything to the factory default condition.
Erasing Learned Buttons, Macros or Favs
Enter SETUP mode by pressing and holding both
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the
Automator will time out automatically.
Press a PAGE button to display page two of Setup.
Press the ERASE button.
Press either the LEARN, MACRO or FAV button.
The following screen appears:
26
The Automator
ALL —
DEVICE—
KEY—
Erases all of the specified (Learned, Macro or
FAV) buttons everywhere in the Automator.
Erases all Learned or Macro buttons in a Device
(this option doesn’t appear for FAVS)
Erases one button only.
1
2
3
4