Alpine DVA-5205 DVD Player User Manual


 
23
Video output ON/OFF
Video output ON/OFF
(Only when CVA-1005/IVA-C800 is
connected)
When this unit is used with the CVA-1005/
IVA-C800 + the TME-M750 (Extra Monitor
for Rear Seat), the DVD video can be
viewed independently of what’s being
viewed on the CVA-1005/IVA-C800.
For example, DVD video can be moni-
tored on the Rear Monitor, while a
Navigation map is displayed on the CVA-
1005/IVA-C800. If an audio source is
selected, the main audio system will be
used to listen to the CVA-1005/IVA-C800.
Use the RCA connectors at the rear of
the DVA-5205 to feed audio to your Rear
monitor.
Set AUX OUT of “Selecting Rear
Monitor” on the CVA-1005/IVA-
C800 side to AUX 1.
Note: This output is at a fixed level and requires a
preamp with a volume control to adjust
listening levels.
Change the source on the CVA-
1005/IVA-C800 side to MD, CD,
radio, etc.
Use the “Playing 2 Sources
Simultaneously” function on the
CVA-1005/IVA-C800 side to select
DVD with the V.SEL button.
Press V.OUT on the
remote control unit for
this equipment at least
2 seconds.
To release, press V.OUT for
at least 2 seconds.
Note: Refer to the Instruction Manual of the CVA-
1005/IVA-C800 for operation on the CVA-
1005/IVA-C800 side.