Filter
Top Products
24
SET UP
Changing the default
settings (setup)
The factory default settings can be
changed to suit your personal prefer-
ences and usage.
Changing the default settings (setup)
Changing the language settings
In the stop mode, press
“SET” for at least 2
seconds.
The default setting menu
appears.
Use the “Joystick” to
make the selection,
then press “ENT”.
For the procedure after
selecting the setting item,
refer to the pages
indicated on the table below.
Note: When the settings are changed, the old
settings are overwritten. Make a note of the
current settings before making changes.
The settings are not cleared even when the
vehicle’s battery is disconnected.
LANGUAGES
TV SCREEN
COUNTRY
CODE
RATING
LEVEL
DOWN
SAMPLING
DIGITAL OUT
LED
INDICATOR
CUSTOM
SETUP
Set the audio language, subtitle
language and menu language.
Set the screen size according to
the type of TV monitor being used.
Set the country code when
setting the rating level.
Set the rating level (parental
lock).
Takes DVD digital sound and
converts it into 48K/16BIT
sampling digital sound.
Set the digital output.
Set whether the front panel’s
LED indicators are on or off.
Set the Closed Caption and
Ai-NET setting.
See
page
→P24
→P26
→P27
→P28
→P30
→P32
→P34
→P35
Item Description
or
Note: This operation cannot be performed in the
PRE-STOP mode.
Changing the
language settings
The audio language, subtitle language and
menu language can be set according to your
preferences.
Select “LANGUAGES” under
“Changing the default settings
(SET UP)” on page 24.