Filter
Top Products
45
5.1.4 Connection Testing
With the previous settings, follow the
instructions below to ensure whether you
have established the connection
successfully.
1. Click Start → Command Programs
2. Type in ping 192.168.1.1 then Enter.
(See the sample screen below)
** This IP is the DVR IP address which is
assigned for the connected DVR.
3. If you receive a response as in the
sample screen below, the connection
hasn’t been successfully established.
Please re-check all the hardware and
software installations by repeating steps 1
to 5. If you still can’t establish the
connection after rechecking, please contact
your dealer.
4. If you receive a response as in the
sample screen below, you have
successfully made the connection.