Filter
Top Products
31
Resolution
Bitrate
Sampling 32kHz, 48kHz. The sound sampling rate. The higher value gives
a higher quality sound but will take up more space on the hard
drive.
Brightness Use this to increase or decrease the recorded image brightness
Contrast Use this to increase or decrease the recorded image contrast
Saturation
Hue Use this to change the color spectrum in the recorded image
Reset Change the above settings to the AV400 default settings
•
button to return to the pre-record screen.
•
• Click the LEFT/RIGHT buttons to adjust the sound input level. Too far
to the right will often give an overdriven distorted quality. Too far to the
left may make for a very soft sound. Try a few recordings to get a sense
of what is the best sound level. Do not let the headphone volume fool
you. That can be adjusted independently with the UP/DOWN buttons.
• If you would like to make a recording in another folder instead of the
default “Video” folder, go to the desired folder via the main Video icon,
then click on the right function button Record.
32
9.2 Where is the Recording Saved?
9.3 Copy Protection
9.4 Manually Setting the Scheduler