Filter
Top Products
7
a LCD/TV button – Hold down for 3 seconds to switch between LCD and
external TV display
b Microphone – for making digital voice recordings
c CompactFlash™ Type I slot
a USB 2.0 port (USB 1.1 compatible) to connect the AV400 to your computer
b Power Connector (use only the supplied Archos power charger/adapter)
c Multi-connect jack* – for headphones, TV Cradle, and AV in/out connections
*The optional multi-connect adapter and AV cable allow for audio and video
playing/recording without the TV Cradle.
Multi-connect Adapter AV Cable
8
Please take the time to read though this manual. There are many
things that this device can do that you may not be aware of.
2.1 Plugging in the AC Adapter
• Use only the included ARCHOS charger/adapter.
•
• You may use the Archos Video AV400 while its battery is charging, but
it will then take longer before the battery is completely charged.
2.2 Turning on the AV400
•
•
2.3 Shutting off the AV400 and Battery saving features
To shut off the unit, press and hold the STOP/ESC/OFF button
for 3 seconds.
In the Power menu [Setup Power: Battery Operation]
there is a Power Off parameter. It is factory set to 2
minutes. Thus, if your AV400 is idle for 2 minutes, it will shut
off. This setting can be changed from one to nine minutes
or to ‘never’.
In the Power menu [Setup
Power: Battery Operation]
there is a Backlight Off parameter to save battery power
(the lighting of the screen consumes a lot of the battery
power). It is factory set to 30 seconds. That is, if there are no buttons
pressed, the screen will shut off in order to save battery life. To turn the
screen back on, just click once on any button. See section 17.5 for a
complete explanation.
INTRO - First Time Usage