Filter
Top Products
Get to know your remote
Power key
(AT&T U-verse service)
Access Closed
Caption menu
Numerical keypad
Return to previous
live TV channel
Learn from
existing remote
View and manage
DVR recordings
Program details
On-screen
navigation
Access the Options
menu shortcuts
Jump forward &
backward in set
increments
Content navigation
Choose your favorite
channels and watch
four at once
Explore, entertain,
and interact with
U-verse Apps
Change channels/
page view within
the Guide
Access Self-Support
Application
Access the latest
On Demand content
Record TV
with one click
Go to Main Menu screen
Mode keys
(AT&T, TV, DVD, AUX)
Return to previous screen
Picture-in-Picture
channel browsing
Return to Live TV
Go to Program Guide
Mute TV volume
Select video
source on TV
Keypad
backlighting
Edit text on
Search screen
14
Step 2:
Enter Pairing Mode – Press and hold the OK and MENU
keys simultaneously for three seconds until all four mode
keys flash red twice and you hear two short beeps to
confirm you are in programming mode.
Step 3:
Press POWER key – Press the POWER key.
The AT&T mode key will flash red once.
Step 4:
Program the power on/off sequence for your devices –
Press the selected mode keys in the sequence that you
want the devices to turn on and off.
Step 5:
Press OK to save – Press the OK key to save the power control
settings. The last selected mode key will flash red twice and you
will hear two short beeps to confirm successful programming.
Change to IR control only (deactivate RF control)
Your Point Anywhere RF Remote Control is set to operate your AT&T U-verse
Receiver using an RF (radio frequency) signal. If you want to deactivate the RF
control and change to IR control only:
Step 1:
Enter pairing mode – Press and hold the OK and MENU
keys simultaneously for three seconds until all four mode
keys flash red twice and you hear two short beeps to
confirm you are in programming mode.
Step 2:
Enter 9 6 7 – Using the numeric keypad on your remote,
enter 9 6 7. The AT&T mode key on the Point Anywhere RF
Remote Control will flash red and beep twice to confirm
deactivation of RF control and change to IR control only.
NOTE: If the programming is interrupted or inactive for
more than 10 seconds, the
AT&T
mode key will give a long
flash and you will hear a long beep. This indicates the Point
Anywhere RF Remote Control has left the programming
mode and returned to normal operation without saving
any changes. You will have to start over again.
11