Filter
Top Products
TELEVISION CONT’D
Emprex 11422, 11765
Envision 11589, 11365, 12087, 10813,
12014
Epson 11122
Epworth 11362
EQD 12014, 12087, 12277
EQD Auria 12014, 12087, 12277
ESA 10171, 11963
Favi 13382
Fisher 11362
Fluid 12964
Fujitsu 10809, 10683, 10853
Funai 10171, 10180, 11394, 11963,
11864
Futuretech 10180
Gateway 11755, 11756
GE 10451, 11547, 11447, 10051,
10765
General
Electric
10451, 11547, 11447, 10051,
10765
GFM 10171, 11665, 11963, 11886,
11864, 11865
Gibralter 10017
Go Video 10060
GPX 13980, 13977, 12693, 13196
Grundig 10683
Grunpy 10180
Haier 11748, 13382, 13429, 12293,
10768, 12494, 11034, 11570,
13204
Hannspree 11348, 12786
Harvard 10180
Havermy 10093
Helios 10865
Hello Kitty 10451
Hewlett Packard 11642
Himitsu 10180
Hisense 13519, 12183, 11660, 12098,
11314, 10748, 13382
Hitachi 11643, 11345, 11576, 10679
HP 11642
Hyundai 13418, 10849, 11219, 11294
I-Inc 11746
iLo 11665, 11684, 11990, 11603,
11286, 11394
Initial 11990, 11603
Insignia 12049, 11641, 11564, 11326,
11423, 11892, 11517, 10171,
10463, 11385, 11660, 11963,
12184, 13227
Inteq 10017
iRIS 12189
iSymphony 13429, 13382, 13094
IX 10877
JC Penney 10060, 10051, 10156
JCM 12189, 12256
Jensen 11326, 13204, 10761, 11299
JVC 11774, 11601, 12321, 12271,
13650, 13854, 11670, 13841,
10683, 12264, 10463, 10650,
11892
KC 14182
KDS 11687
KEC 10180
KLH 10765
Kolin 11240
Konka 11385
KTV 10180
Legend 12397
LG 12731, 11423, 12358, 13397,
13979, 12864, 12612, 12867,
10017
LodgingStar 13147
LXI 10156, 10017
MAG 11687
Magnavox 13623, 11866, 12372, 11454,
12597, 11963, 10706, 11455,
11990, 11198, 10171, 11365,
10051, 10802, 11755, 11867
Marantz 11398, 11454
Matsushita 10051, 10250, 10650
Maxent 11755, 11757
MB Quart 11868
Step 4:
Press the key you want to learn – Press the key on the
Point Anywhere RF Remote Control that you want to learn
a command. The green LED indicator READY TO LEARN
will flash green rapidly when the remote is ready to accept
the new command.
NOTE: The learning function will time out after 10 seconds of inactivity.
Step 5:
Press the key you want to learn from – Next press the corresponding
key from the device’s original remote to send the command you want
to learn. The READY TO LEARN LED will flash green twice and you will
hear two short beeps to confirm it has “learned” and saved the desired
command. Then the red LED indicator SELECT KEY TO LEARN will light
up to indicate that the remote is ready to learn the next command.
Step 6:
Complete learning – Repeat Step 4 and 5 as necessary to program all
remaining functions.
Exit learning – Once all of the keys are programmed as desired, press the LEARN
key. The previously selected mode key will blink red twice and you will hear two
beeps to indicate you have exited learning mode.
NOTE: When the green indicator READY TO LEARN is flashing but learning is
inactive for 10 seconds, all four mode keys will flash red once for two seconds and you
will hear a long beep. Then the remote will go back to the previous status and the red
indicator SELECT KEY TO LEARN will light again to remind you to retry learning.
NOTE: If the programming is interrupted or inactive for more than 10 seconds,
all four mode keys will flash red once for two seconds and you will hear a long beep.
The remote will then leave the learning mode and return to normal operation.
Low battery indicator
When the battery power is low, the active mode key will flash red five times with
each key press. This indicates that it is time to replace your remote control
batteries to maintain optimal performance.
8
Remote features