AVerMedia Technologies AVerKey300 Universal Remote User Manual


 
Chapter 2 Hardware Installation and Setup
7
supplied Computer Extension Cable. (A
Computer Adapter should be used to connect.)
VGA OUT : The computer monitor should be connected to this
port. (A Monitor Adapter is needed to connect the
Macintosh or NEC monitor.)
Connecting an IBM PC and VGA Monitor
To connect the AVerKey300 with an IBM PC or compatible and a
VGA monitor, follow the setup diagram and step-by-step procedure
below.
1. Connect the
AVerKey300 to the PC.
Plug one end of the supplied Computer Extension Cable to the
AVerKey300 “VGA IN” port and the other end to the PC’s VGA
port.
2. Connect the VGA monitor to
AVerKey300.
Plug the VGA monitor cable to the
AVerKey300 “VGA OUT”
port.