Filter
Top Products
9
Chapter 2 Operating the EB1304 MPEG4
+
2.1 Using the EB1304 MPEG4
+
for the First Time
Upon connecting the power, the unit automatically detects the status of the hard
disk. The hard disk must be formatted before you can use it with EB1304 MPEG4
+
.
If you are prompt to format the hard disk, press (select) for
YES
to format the
hard disk and (menu) for
NO
to remain unchanged.
HARD DISKS INFORMATION
VERSION 1 . 2. 10
HDD
HDD FORMAT YES (SELECT) / NO (MENU)
HDD CHECKING . . .
SIZE 76GB 509MB
Before starting record video, adjust the date first. Press to call up the OSD
menu, and then use and or and to go up and down and
select
Submenu
. And then,
press or . In
Submenu
, select the
Date
and
press or again to make a selection. And then, use and or
and to adjust the date and use and buttons to move the
selection to the left and right.
2.2 Surveillance Screen
To know if the channel is being recorded, the “” record symbol would appear
beside the channel number. The (microphone) and (speaker) indicate that
the audio is available. The information below the screen shows the current date
and time, recording mode (record schedule setting), and the percentage of the
used hard disk space.