Filter
Top Products
17
OSD MENU Description
OVERWRITE ENABLED :
Enable/disable replacing the earliest record when the
hard disk space runs out. By default, the HDD overwrite
setting is enabled
HDD FORMAT :
For security purpose, you may have to enter the
password to format hard disk
To format hard disk:
1. Use the and or and
buttons to go up and down and select
HDD
FORMAT
. Then press or
2. In the
CHECK PASSWORD
screen, press
or . Then use the and or
and buttons to select the security
combination number. Press or
button again to make the selection. Repeat till you
key in the last number
To move the selection to the left and right, use
and or and buttons
CHECK PASSWORD
ENTER PASSWORD
3. After entering the last number, the system will
format the hard disk
4. It is done when the “HDD FORMAT COMPLETED”
appears
YES
HARD DRIVE SETUP
OVERWRITE ENABLED
HDD FORMAT COMPLETED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 0MB 0%
HDD FORMAT
Formatting the hard disk will permanently
delete all the records and can no longer be
retrieved
YES
HARD DRIVE SETUP
OVERWRITE ENABLED
HDD SIZE 37 GB 78MB
HDD USED 0 GB 232MB 0%
HDD FORMAT
* HDD SIZE shows the total capacity
of the hard disk.
* HDD USED shows the amount of
space that has been used.