AVerMedia Technologies EB1304 MPEG4+ DVR User Manual


 
1
Chapter 1 Introduction
EB1304 MPEG4
+
is a 4-channel stand-alone DVR unit that provides real-time
monitoring and digital recording of surveillance video. Up to four video cameras
and four sensor devices can be hooked up to this DVR unit. It is also equipped with
an output relay that allows connection of an alarm device.
Surveillance, digital recording and playback are controlled through the front panel
buttons. With the On-Screen-Display (OSD) menu, user can customize video
recording setting, sensor and alarm settings, password protection, hard drive
recycling, and more. Through USB connection, user can playback the video with
the bundled software, segment the video to only keep the wanted portion and save
it in MPG/AVI format, and capture still image and save it in BMP format or print it.
Surveillance video is recorded in high-quality MPEG4 format. Two recording modes
are supported, D1 Mode can record video from each video camera in 720 x 480
resolution at 60fps and CIF Mode can record video in 360 x 240 resolution and up
to 120 fps/100 fps (NTSC/PAL).
Connecting cameras, sensors, alarm, and display device