Filter
Top Products
15
OSD MENU Description
RECORD SCHEDULE
00 : 00 - 01 : 00
01 : 00 - 02 : 00
02 : 00 - 03 : 00
05 : 00 - 06 : 00
06 : 00 - 07 : 00
07 : 00 - 08 : 00
08 : 00 - 09 : 00
09 : 00 - 10 : 00
10 : 00 - 11 : 00
11 : 00 - 12 : 00
12 : 00 - 13 : 00
04 : 00 - 05 : 00
03 : 00 - 04 : 00
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
ALWAYS REC
RECORD SCHEDULE:
By default, in 24 hours, the recording schedule is set to
always record every hour. Refer to the table below to
customize the recoding condition
Condition Description
NO REC Disable video recording
ALWAYS REC Record non-stop
SENSOR REC
Start recording when the sensor has
activated.
2006 / 04 / 20
17 : 54 : 50
ON
ON
ON
OFF
PAL
NO
SUBMENU
PASSWORD CHANGE
VIDEO ADJUSTMENT
DATE
TIME
AUTO RECORD
AUTO SCAN
PASSWORD SETUP
AUDIO RECORD
AUDIO MUTE
AUDIO SYSTEM
OFFCOLOR STABILITY
PASSWORD CHANGE :
Set a security combination number. This is a security
measure that prevents formatting of the hard disk or
changing the system settings. The factory default
password is 111111
PASSWORD
CURRENT
NEW
CONFIRM
VIDEO ADJUSTMENT :
Select the camera number and set to adjust the video
brightness, contrast, hue, and saturation value
1
050
050
000
024
MODE 1
VIDEO ADJUSTMENT
CAMERA
BRIGHTNESS
CONTRAST
HUE
SATURATION
COLOR PHASE
NO
RESET TO DEFAULT VALUE
DATE :
Set the current date
TIME :
Set the current time
AUTO RECORD :
Enable/disable auto continue recording when
interrupted (i.e., power breakdown, video playback or
configuration setup). It continue recording after 10
second of idleness. This is applicable in Always Record
mode
AUTO SCAN :
Enable/disable auto cycle switch to display the next
channel when in full screen preview