Filter
Top Products
33
AXIS 241QA/AXIS 241SA - Pan Tilt Zoom
PTZ configuration
Once PTZ has been installed for the AXIS 241QA/AXIS 241SA, PTZ Configuration now
appears in the menu to the left with the following sub menus.
Preset positions
A preset position is a pre-defined camera view than can be used to quickly move the
camera to a specific location.
From Prese
t Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera
to the required position. When satisfied with the camera's position, enter a descriptive
name. The camera position, iris and focus settings are then saved as a preset position.
The position can be assumed at any time, by sele
cting the preset's name from the Preset
positions drop-down list. Preset positions can be selected in Live View, from events and in
Sequence mode.
One position can be set as the Hom
e position, which is readily accessible by clicking the
box beside Use current position as Home. The position's name will then have (H) added to
the end, such as Office Entrance (H).