Filter
Top Products
54
AXIS 241QA/AXIS 241SA - System options
Ports & devices
I/O Ports - the pinout, interface support and the control and monitoring functions
provided by this connector are described in Unit connectors,
on page 57.
RS232
- The COM port RS-232 on the AXIS 241QA/AXIS 241SA supports several
operational modes listed on this page. For more information, please see COM ports RS-232
and RS-485,
on page 59.
RS485
- The COM ports on the AXIS 241QA/AXIS 241SA supports several operational
modes listed on this page. For more information, please see COM ports RS-232 and
RS-485, on page
59.
Maintenance
• Restart - The unit is restarted without changing any of the settings. Use this method if
the unit is not behaving as expected.
• Restore - The unit
is restarted and most current settings are reset to factory default val-
ues. The settings that are not affected are:
• the boot protocol (DHCP or static)
•
the static IP address
• the default router
•the subnet mask
• the system time
• De
fault - The default button should be used with caution. Pressing this will return all of
the video server's settings to the factory default values (including the IP address)
• Upgrade
Server - See Upgrading the firmware, on page 61.
• Backup -
To take a backup of all of the parameters, and any user-defined scripts, click
this button. If necessary, it is then possible to return to a previous configuration if set-
tings are changed and there is unexpected behavior.
• Restore -
click the Browse button to locate the saved backup file (see above) and then
click the Restore button. The settings will be restored to the previous configuration.
Note:
Backup and Restore can only be used on the same unit running the same firmware. This feature is not
intended for multi-configurations or for firmware upgrades.
Support
The support overview page provides valuable information on troubleshooting and contact
information, should you require technical assistance.
The Sys
tem Overview provides a summary of the status of the video server.
Logs & Reports
- when contacting Axis support, please be sure to provide a valid Server
Report with your query.