Filter
Top Products
10
Connect and use a PC
IMPORTANT! Before connecting a PC to
the television, disconnect the television,
the computer, and all equipment
connected to the computer from the
mains.
To connect a computer to the
television …
> Using the appropriate type of cable,
connect one end to the DVI, VGA or HDMI
output socket on your computer, and the
other end to the VGA or HDMI socket on
the television.
> To hear sound from the computer in the
speakers connected to the television, use
the appropriate cable and connect the
sound output on the computer to the R–L
or SPDIF sockets on the television when
appropriate.
> Reconnect the television, the computer,
and all equipment connected to the
computer to the mains. Remember, the
computer must be connected to a
grounded wall outlet as specied in its
setting-up instructions.
If you have connected your PC to the VGA
socket on the television, you must register
the PC to the AV3 socket in the
CONNECTIONS menu. A PC connected to
the HDMI socket can be registered to any of
the AV sockets or socket groups.
Bring up the computer image on the
screen
To see the computer picture on the screen,
you must bring it up with your remote
control.
To bring up the computer picture …
> Press LIST and use the navigation button
up or down to bring up PC in the Beo4
display and press the centre button to
bring up the picture. You can then operate
the computer as you normally would.
(Beo5: Press Pc).
>> Connections