Filter
Top Products
5
MENU LANGUAGE… You can select the
language for on-screen menus. The text
on the screen changes as you move from
language to language.
TUNER SETUP … Disable the television tuner
or DVB tuner, if you like, see page7.
CONNECTIONS … Select the type of
equipment you have connected to each
socket groups, the sockets used, the
product name, and the source name.
For further information about the
CONNECTIONS menu, see page8.
CHECK AERIAL CONNECTION… This
prompt only appears, if the television
tuner is enabled.
AUTO TUNING … When you have registered
your connected equipment, a menu for
channel tuning automatically appears on
the screen. Use the navigation button
right to start auto tuning. The television
nds all available channels. For further
information about tuning TV channels,
see page15.
SPEAKER TYPE… In this menu, you select
which speakers are connected to the
television, if any. See page19 for further
information.
SPEAKER DISTANCE… In this menu, you
select the distance in metres to each of
the speakers in your setup.
SPEAKER LEVEL… In this menu, you can
adjust the volume level of each speaker in
your setup.
ADJUSTMENT… In this menu, you can
adjust bass, volume, treble, etc.
DVB SETUP… If the DVB HD tuner is
enabled, the DVB SETUP menu appears,
see the separate DVB HD Guide for further
information.
For information about where to connect
extra equipment, see the chapter about
connection panels in Getting Started.
First-time setup
The setup procedure is activated
when the television is connected
to the mains and switched on for
the rst time. You are led
through an automatic series of
on-screen menus in which you
must register the extra
equipment you have connected,
such as loud speakers.
If you change your setup at a later
date,
you can access the same
menus and update your settings.
Remember that you need to set
the speaker types and the
distances in the SOUND menu.
The sequence of menus in rst-time setup