Bang & Olufsen Aug-40 Flat Panel Television User Manual


 
23
Adjust picture and sound settings
Picture and sound settings are 
preset from the factory to 
neutral values which suit most 
viewing and listening situations. 
However, if you wish, you can 
adjust these settings to your 
liking. 
Adjust picture brightness, 
contrast or colour. Sound 
settings include volume, bass 
and treble. 
Store your picture and sound 
settings temporarily – until your 
television is switched off – or 
store them permanently. 
Activate GAME MODE if you 
connect a game console to your 
television.
For information about how to 
change the picture format, see 
Getting Started. 
Adjust brightness, colour or contrast
Adjust the picture settings via the
PICTURE menu. Temporary settings are
cancelled when you switch off the
television.
> Bring up the TV SETUP menu and 
highlight OPTIONS.  
> Press the centre button to bring up the 
OPTIONS menu and highlight PICTURE. 
> Press the centre button to bring up the 
PICTURE menu.
> Use the navigation button up or down to 
move through menu items.
> Use the navigation button left or right to 
adjust the values.
> Press BACK to store your settings until 
you switch off the television, or
> … press the centre button to store your 
settings permanently.
For video sources using the VGA signal, the 
following options appear as well:
HOR. SIZE … Adjusts the picture size along 
the horizontal axis.
VERT. SIZE … Adjusts the picture size along 
the vertical axis. 
HOR. POSITION … Adjusts the picture 
position along the horizontal axis. 
VERT. POSITION … Adjusts the picture 
position along the vertical axis. 
Note that these four settings only apply for 
the screen resolution in effect at the time 
you adjust the settings. 
To temporarily remove the picture from the
screen, press LIST and use the navigation
button up or down to bring up P.MUTE in
the Beo4 display and press the centre
button. To restore the picture, press a
source button. (Beo5: Press to bring up
the Scene display on Beo5, press Picture,
then press P.Mute. To restore the picture,
press P.Mute again).
When signals are sent in format 720p,
1080p or 1080i, the menu item SIZE is
available in the PICTURE menu.
PICTURE
BRIGHTNESS .... . . . .
CONTRAST .... . . . .
COLOUR .... . . . .
TINT .... . . . .
SIZE .... . . . .
GAME MODE