Filter
Top Products
9
In the AV menus you can select how a
PUC controlled product is connected.
You can choose between ‘PLUG’ (cable)
and ‘IR’ (IR Blaster).
IR-transmitters: To operate non-Bang&
Olufsen products with a Bang& Olufsen
remote control, attach a Bang& Olufsen IR-
transmitter to each of the products. Connect
each transmitter to the corresponding socket
marked PUC on the main connection panel.
>> Connections
The CA module is a ‘card reader’ for your
Smart Card which decodes the coded
signals sent out by the programme
provider.
Insert the Smart Card in the CA module with
the chip facing towards the television. The
CA module has one protruding edge on one
side and two protuding edges on the other
side. The side with one edge should face
upwards. The Conax Smart Card must be
inserted with the chip facing away from the
television front.
IR type
DVB module
STB
STB
PLUG
IR
BACKSIDE
5 V
0.5 A
CHIPSIDE
CA
SMARTCARD