Filter
Top Products
40
System modulator
If you have an audio setup, such as a
BeoLink Active/Passive, and you choose
to set up a non-linkable television in the
same room, you must set the sys tem
modulator to ON. The factory setting is
AUTO, which must be used if you are
using a linkable Bang & Olufsen
television.
To switch on the system modulator …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight
CONNECTIONS.
> Press the centre button to bring up the
CONNECTIONS menu, and highlight LINK
TUNING.
> Press the centre button to bring up the
LINK TUNING menu and highlight
MODULATOR.
> Use the navigation button left or right to
reveal ON.
> Press the centre button to store the
setting, or …
> … press and hold BACK to leave all menus
without storing.
>> Distribute sound and picture with BeoLink
Link frequency
If, for example, a TV channel in your
area is broadcasted on the same
frequency as the factory setting for the
BeoLink system; 599 MHz, you must tune
the system modulator to an unoccupied
frequency. When you change the link
frequency in the main room television,
make sure that the link frequency in the
link room television corresponds to it.
To change the link frequency …
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight
CONNECTIONS.
> Press the centre button to bring up the
CONNECTIONS menu, and highlight LINK
TUNING.
> Press the centre button to bring up the
LINK TUNING menu and highlight
FREQUENCY.
> Use the navigation button left or right to
nd an unused frequency.
> Press the centre button to store the
setting, or …
> … press and hold BACK to leave all menus
without storing.
The LINK TUNING menu.
The LINK FREQUENCY menu.
When tuning in the link frequency in the link
room, a test image is shown. FINE TUNE is
only available in link room/Option 4 setups.
LINK TUNING
FREQUENCY 599
TV SYSTEM B/G
MODULATOR AUTO
LINK TUNING
FREQUENCY 599
FINE TUNE 0
TV SYSTEM B/G