Bang & Olufsen Aug-40 Flat Panel Television User Manual


 
25
Adjust volume, bass or treble
Sound settings are preset at the factory
to neutral values which suit most
listening situations. However, if you
wish, you can adjust these settings to
your liking.
You can preset levels for sound volume,
bass, treble and a subwoofer.
You can switch the loudness feature on
or off. The loudness feature
compensates for the human ear’s lack of
sensitivity to high and low frequencies.
These frequencies are boosted at low
volume levels so that low music becomes
more dynamic.
In addition, you can preset two default
speaker combinations; one to be used
each time you switch on a video source
in your television, and one to be used
each time you switch on an audio source
connected to your television. You can
still select a different speaker combination
any time you wish.
For further information about speaker
combinations, see page26.
To adjust sound …
> Bring up the TV SETUP menu and highlight 
OPTIONS.
> Press the centre button to bring up the 
OPTIONS menu and highlight SOUND. 
> Press the centre button to bring up the 
SOUND menu, and highlight 
ADJUSTMENT.
> Press the centre button to bring up the 
ADJUSTMENT menu.
> Use the navigation button up or down to 
select an item to adjust.
> Use the navigation button left or right to 
adjust the values or choose a setting. 
> Press BACK to store your settings until you 
switch off your television, or… 
> …press the centre button to store your 
settings permanently. 
The content of the ADJUSTMENT menu
varies according to what you have
connected to the television.
>> Adjust picture and sound settings
ADJUSTMENT
VOLUME .... . . . .
BASS .... . . . .
TREBLE .... . . . .
SUBWOOFER .... . . . .
LOUDNESS ON
DEFAULT VIDEO SPEAKER3
DEFAULT AUDIO SPEAKER2