Filter
Top Products
58
12. RS232 Codes
1. Set up peripherals
BenQ PE8700 provides an RJ-11 connector for RS232 serial communication control. The
user can use the ‘Hyper Terminal’ program of Microsoft Windows to control this unit.
To set the settings of serial port first is necessary. Choose which COM port you want
to connect, and set its settings as below:
Baud Rate: 115200 or 9600
Parity: None
Data bits: 8
Stop bits: 1
Flow Control: None
For baud rate setting, it depends on the settings in our \Factory OSD\FACTORY\RS232
BAUDRATE\ 9600 or 115200.