Filter
Top Products
65
Example:
1. Command = Y89893 (Enter)
ACK = Y1Y (Illegal format, wrong length)
2. Command = Y98 (Enter)
ACK = Y2Y (Illegal function)
3. Command = Y52 (Enter)
1
st
ACK = Y0Y
2
nd
ACK = Y0_52Y
For Z-group, this one is for ‘auto-alignment’ procedure in our factory. This one allows
engineers to read or write the unit settings without OSD operation, it will save time to set
the value. Following is the table of Z-group.
Code Function
Z001 Brightness adjustment
Z002 Contrast adjustment
Z003 Color adjustment
Z004 Sharpness adjustment
Z005 Tint adjustment
Z006 Color temperature adjustment
Z007 Filters adjustment
Z008 Independent color control - Red adjustment
Z009 Independent color control - Green adjustment
Z010 Independent color control - Blue adjustment
Z011 Independent color control - Yellow adjustment
Z012 DMD white peaking adjustment
Z020 Frequency adjustment
Z021 Phase adjustment
Z022 H - Position adjustment
Z023 V - Position adjustment