Filter
Top Products
32
Operation
1. Picture menu
Some picture adjustments are available only when certain input sources are in use. Unavailable
adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Application Mode
(PC/DVI-A:
Presentation;
YPbPr/ S-Video/
Video/ DVI-D: Home
Theater)
Pre-defined application modes are provided so you can optimize your projector image
set-up to suit your program type.
You can use the remote control MODE button to select a predefined application mode
as well. See "2. Selecting an application mode" on page 28 for details.
Keystone
(0)
Corrects any keystoning of the image. See "Correcting keystone" on page 25 for
details.
Color Temp
(depends on the
selected Application
mode)
Sets a preferred color temperature. See "5. Selecting a color temperature" on page 29
for details.
Brightness
(depends on the
selected input
source)
Adjusts the brightness of the image. See "1. Adjusting brightness" on page 28 for
details.
Contrast
(depends on the
selected input
source)
Adjusts the degree of difference between dark and light in the image. See "2. Adjusting
contrast" on page 29 for details.
Color
(depends on the
selected input
source)
Increases or decreases the color intensity of the image. See "3. Adjusting color" on
page 29 for details.
Tint
(50)
Adjusts the color tones of the image. See "4. Adjusting tint" on page 29 for details.
When a Video or S-Video signal is connected, the function is only available
with NTSC system selected.