BenQ W100 Projection Television User Manual


 
35
Operation
4. Advance menu
FUNCTION
(default setting /
value)
DESCRIPTION
Mirror
(Floor front)
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. Contact your dealer for the ceiling mount bracket (optional accessory) if you
need to install the projector on your ceiling. Refer to "Choosing a location" on page
12 and "Safety instructions for ceiling mounting of the projector" on page 13 for
more information.
Source Scan
(on)
Sets whether the projector searches automatically for input signals. If the source scan
is On, the projector will scan for input signals until it acquires a signal. If the function
is not activated, the projector selects the last used input signal. The default value is
'DVI-A'.
Language
(English)
Sets the language for the OSD control menus. There are 17 languages available:
English, French, German, Italian, Spanish, Russian, Traditional Chinese, Simplified
Chinese, Japanese, Korean, Swedish, Dutch, Turkish, Czech, Portuguese, Thai, and
Polish.
Use Left/ Right on the projector or remote control to select your desired
language.
Splash Screen
(BenQ logo)
Allows you to select which logo screen will display during projector start-up. Three
modes are available: Default (BenQ logo), black screen or blue screen.
High Altitude
Mode
(off)
A mode for operation in areas like high altitude or high temperature. See "Operating
in a high altitude environment" on page 26 for details.
Auto Off
(off)
This function allows the projector to turn off automatically if no input signal is
detected after a set period of time. Press Left/ Right on the projector or remote
control to set the duration before the projector is turned off. Selecting Off disables
this function.
Economic Mode
(off)
Use this mode to reduce system noise and reduce power consumption by 20%. If this
mode is activated, the light output will be reduced and result in darker projected
images.
Setting the projector in Economic mode extends the lamp timer automatic
shutdown feature. For more information on how the total lamp hour is
calculated, see "Calculation of lamp hour" on page 38.