Filter
Top Products
27
A/C-7P RO, A/C-7S RO
1.Type the Command Pass-Thru
delimiter &% (or alternate CPT
beginning delimiter) in the
document at the point where the
command is to take effect.
2.Type an upper case “Z” (or the
alternate command ID
character).
3.Type the command number for
the command to be used, as
shown in the table.
4.Type a comma.
5.Type the value representing the
desired selection. No spaces are
allowed. A space or invalid
character in a command causes
the A/C-7 RO to ignore the
command and resume printing
from the point the error
occurred.
6.A space or control character
(NL, LF, CR, or FF) signals the
end of the download command.
7.Multiple commands can be
chained together by using a slash
(/) or backslash (\) to separate
the commands (no spaces
allowed). For example, to set the
Form Length (Command 05) to
64 lines (Value 64), the Buffer
Size (Command 01) to 960
characters (Value 1), and the
Character Density (Command
03) to 12 CPI (Value 12), type:
&%Z05,64/Z01,1/Z03,12
4.4 Host/PC Download Command
Overview
Table 4-10 shows the Coax Host/PC
Download commands and their
corresponding command numbers
in alphabetical order: