Filter
Top Products
61
A/C-7P RO, A/C-7S RO
For example:
&%L00086 selects a Prestige 12 CPI
font in landscape orientation.
The font ID number must select a
font available in the printer or in the
installed cartridge. If the proper
cartridge is not installed, or the font
does not exist on the cartridge, then
the printer will automatically select
an alternate font for printing.
Multiple font changes can be made
in a document as long as all fonts are
in the same orientation. Changes in
orientation (portrait or landscape)
automatically eject the page. A font
ID that changes the orientation from
the previous page must be on the
first line and first position of the
page or a blank page will be ejected.
A blank page at the first of a print
job is often caused by a change in
orientation. Command 61 must be
set to “1” (APO Disabled),
Commands 62-64 must be set to “3”
(User Defined).
5.6 Computer Output Reduction
(COR)
Computer Output Reduction (COR)
is an IBM printer feature that
automatically rotates data processing
reports to landscape orientation and
compresses the text to fit 198
columns x 66 lines on the page.
COR is enabled by doing the
following:
1.Select APO active with command
61 (value 0).
2.Select COR for the paper source
with commands 62-64 (value 0).
When COR is enabled, the
following format changes are
automatically made to data
processing reports:
• The page is printed in landscape
orientation.
• Vertical line height is 70% of that
specified.
• A 0.5-inch blank area is provided
on the top and left edge of the
paper.
• The selected pitch is changed:
10 pitch to 13.3 pitch; 12 pitch
to 15 pitch; 15 pitch to 19 pitch.