Filter
Top Products
5. Select an iSCSI device and select the desired VRM, and
click Assign to assign the iSCSI device to the VRM.
Click Next >>.
6. Select the required encoders, select the desired VRM and
click Assign to assign them to the VRM.
The video data of these encoders will be stored on the
assigned iSCSI device.
Click Next >>.
7. Type all user names and passwords of the listed device in
the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected
devices. This is useful when you repeat the device scan and
you want only the new ones to be authenticated.
8.
Click Save >>.
Click Finish when you did not select further devices to be
scanned.
To scan local storage or live only encoders:
1.
Select the desired encoders and click Assign.
The video data of these encoders will be stored on their
local storage devices or their video data will not be stored
(live only).
2. Type all user names and passwords of the listed device in
the appropriate cells.
Click Test all to authenticate all devices.
Click Test selected to authenticate only the selected
devices. This is useful when you repeat the device scan and
you want only the new ones to be authenticated.
3.
Click Save >>.
Click Finish when you did not select further devices to be
scanned.
52
en | Basic configuration tasks
Bosch Video
Management System
2012.07 | V1 | F.01U.269.054 Quick Start Manual Bosch Sicherheitssysteme GmbH