Filter
Top Products
4.
Click Add iSCSI device.
The Add iSCSI Device dialog box is displayed.
5. Type a desired display name, the IP address of an iSCSI
device, and the device type and click OK.
The device is added to the scan wizard dialog box.
6. Assign the iSCSI device to the VRM.
If required assign multiple iSCSI devices.
7.
Click Next >>.
The next step of the wizard is displayed.
8. Assign the desired IP devices to the VRM.
9.
Click Next >>.
The next step of the wizard is displayed.
10. Type the user names and passwords of the devices in the
table.
11.
Click Test all to log on to all devices.
If required, select the desired devices and click Test
selected to log on to these devices.
In the Status column, the successful logons are indicated
with
.
The failed logons are indicated with .
12.
Click Finish.
The iSCSI device is connected to the VRM. Video streams
from an IP device assigned to this VRM are recorded on the
assigned iSCSI device.
If required, a dialog box is displayed for changing the
device names of the detected IP devices to be used for
display. Bosch Video Management System names the
devices with default names. If desired, you can use the
existing names of the devices.
54
en | Basic configuration tasks
Bosch Video
Management System
2012.07 | V1 | F.01U.269.054 Quick Start Manual Bosch Sicherheitssysteme GmbH