Filter
Top Products
Basic operation tasks
This chapter provides a selection of step-by-step instructions for
basic operation tasks.
Displaying a camera in an Image pane
Main window
To assign a camera image to an Image pane:
4
Drag a camera from the Logical Tree window to an Image
pane.
The selected camera image is displayed in the Image pane.
Or:
1. Select an Image pane.
2.
In the Logical Tree window, double-click a camera.
The selected camera image is displayed in the Image pane.
3. Repeat the above steps for every camera you want to
display.
You can also drag maps and documents to Image panes.
Or:
4
In the Logical Tree, right-click a camera and click Show in
next free Image pane.
The camera is displayed.
To move a camera within the Image window:
4
Drag the camera into another Image pane.
To zoom digitally:
4
Right-click anywhere on an Image pane and click Zoom in.
Starting a camera sequence
Main window
With a camera sequence, a group of cameras are displayed one
after the other.
You configure the dwell time for these sequences in the Options
dialog box (Extras menu, Options... command).
Under the following conditions, a sequence is not being
displayed:
5
5.1
5.2
64
en | Basic operation tasks
Bosch Video
Management System
2012.07 | V1 | F.01U.269.054 Quick Start Manual Bosch Sicherheitssysteme GmbH