Filter
Top Products
9
SETUP
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
3. Insert each plug into the connector on the proper
speaker.
The plug marked RIGHT goes into the speaker
placed to the right of your TV.
4. Insert the remaining single plug into the connector
labeled SPEAKERS on the back of the Acousti-
mass
®
module.
5. Tighten each fastener screw by hand to secure
the plug.
CAUTION: Do not plug the Acoustimass module into an
AC power (mains) outlet until all other components are
connected.
6. Continue with on the next page.
Fastener screws
3