Filter
Top Products
29
SETUP
Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
2. Insert this plug into the power connector that is
marked on the Acoustimass
®
module.
Note: On some systems, the Acoustimass
module includes one of two controls.
On 220-240V models only, turn the
POWER switch to on ( l ).
On dual-voltage systems only, set
the voltage switch for the power
that is appropriate to the region
where you use the system.
3. Plug the other cable end into the AC (mains) power.
CAUTION: Bose recommends using a safety agency-
approved surge protector on all electronic equipment.
Voltage variations and spikes can damage electronic
components in any system.
Note: Surge protectors are available at most
electronics stores.
4. Continue with on the next page.
9
~