Filter
Top Products
31
Saving or deleting a phrase
Erasing a saved phrase (Delete)
fig.08-03
1.
Turn the PHRASE SELECT knob to select the phrase track that you wish to
delete.
2.
Simultaneously press the SHIFT (EXIT) button and the DELETE (WRITE)
button to get both indicators to flash.
The RC-20XL will be ready to delete the data.
3.
Press the DELETE (WRITE) button to delete the data.
To cancel this operation, press the EXIT button.
The indicator will be lit while the data is being deleted, and will go out when the
deletion is complete.
Never turn off the RC-20XL’s power while the WRITE indicator or the EXIT
indicator is lit. Doing so will cause all data saved in the phrase tracks to be lost.
* It is not possible to delete all phrase tracks in one operation.
Write Protect mode
You can temporarily prevent phrases from being saved or erased.
This condition is called “Write Protect mode.”
To select Write Protect mode, hold down the WRITE button as you turn on the
power. Confirm that all four indicators to the right of the MODE button are lit,
then release the button.
This setting will be cleared when you turn off the power, so the next time power is
turned on, you will once again be able to save or erase phrases.