Boss Audio Systems RC-20XL DVR User Manual


 
5
Panel Descriptions
4
MIC Knob
This knob adjusts the input level from the
MIC jack.
INST Knob
This knob adjusts the input level from the
INST jack.
PEAK Indicator
This indicator will light when the level of the
input is excessively high.
5
REVERSE Button
Turn this button on (indicator lit) when you
want the phrase to play back in reverse (p. 26).
6
TAP TEMPO Button
This button is used to set the tempo or time
signature.
The indicator will light to indicate the current
tempo and time signature (red on the first
beat, green on subsequent beats).
Tempo
Specify the tempo by the interval at which
you press the button (p. 33).
Time signature
When you press and hold the button for
two seconds or longer, it will switch to time
signature setting mode. Then press the
button the number of times that is
equivalent to the numerator of the desired
time signature (p. 34).
When this button is pressed while the
SHIFT (EXIT) button is held down, it
functions as the GUIDE SELECT button,
allowing you to switch the guide sound (p.
35).
7
WRITE Button
This button is used to save a recorded
phrase into internal memory (p. 29).
When this button is pressed while the SHIFT
(EXIT) button is held down, it functions as the
DELETE button, allowing you to delete the
phrase on the selected track (p. 31).
8
EXIT (SHIFT) Button
This button is used to halt a phrase save or
delete operation.
This is also used as a SHIFT button for
switching the functions of other buttons.
9
AUTO START Button
Turn this button on (indicator lit) if you
want recording to begin simultaneously
when the performance begins.
When this button is pressed while the
SHIFT (EXIT) button is held down, it
functions as the LOOP/ONE SHOT button,
allowing you to switch between phrase
playback and one-shot playback for phrases
saved to the selected track (p. 22).
* You cannot switch anything if there is no
phrase saved (both the LOOP PHRASE and
ONE SHOT PHRASE indicators are off). The
unit remains set to loop playback.
10
MODE Button
This button selects the recording method.
When this button is pressed while the
SHIFT (EXIT) button is held down, it
functions as the STOP MODE button,
allowing you to select the stop mode (p. 23).
RC-20XL_e.book 5 ページ 2004年4月28日 水曜日 午後4時12分