Filter
Top Products
4
Panel Descriptions
Front Panel
fig.02-01
1
LEVEL Knob
This knob adjusts the play volume of the
phrase.
* This knob does not adjust the input level from
the INST/MIC/AUX IN jacks or the volume of
the guide tone.
2
GUIDE Knob
This knob adjusts the volume of the guide
tone that sounds according to the tempo
while a phrase is being recorded or played.
LOOP QUANTIZE Indicator
This indicator lights when the Loop Quantize
function (p. 32) is activated.
3
PHRASE SELECT Knob
This knob selects the phrase track that will be
saved or played.
LOOP PHRASE Indicator
This indicator will light if a phrase has been
saved in the selected track.
* The flashing light indicates there is not enough
memory for recording or overdubbing
(temporary memory; p. 28).
* The light flashes rapidly to indicate there is not
enough memory to save the phrase.
* The light flashes rapidly while the loop phrase is
read from memory. Be careful not to turn off the
power while this light is flashing rapidly.
ONE SHOT PHRASE Indicator
This indicator will light if a one shot phrase
has been saved in the selected track.
* The flashing light indicates there is not enough
memory for recording or overdubbing
(temporary memory; p. 28).
* The light flashes rapidly to indicate there is not
enough memory to save the phrase.
* The light flashes rapidly while the one shot phrase
is read from memory. Be careful not to turn off
the power while this light is flashing rapidly.
When both the LOOP PHRASE indicator and
ONE SHOT indicator are flashing
* If these indicators are flashing before recording,
it indicates that there is insufficient memory for
recording, so you will not be able to record.
* If the indicators flash after recording, it
indicates that there is insufficient memory to
undo (p. 6) the recording, so you may not be
able to execute the undo.
1
7
2 3 4
5
6
10
8 9
RC-20XL_e.book 4 ページ ２００４年４月２８日 水曜日 午後４時１２分