Filter
Top Products
10
®
3
Figure #4
Figure #3
WHITE
BEZEL
ALMOND
BEZEL
RUBBER KEY
PAD
RUBBER KEY
PAD
LOCATING
PINS (4)
LOCATING
PINS
HOLES(4)
W-85 Wall Control Bezel replacement: -
CONTINUED
Step 17c. Locate the rubber key pad attached to
the four (4) locating pins as shown in Figure #3 and
remove rubber key pad from the WHITE bezel, also
as shown in Figure #3.
Step 17d. Reinstall the rubber key pad on to the
four (4) locating pins located on the almond bezel
as shown in Figure #4.
Step 16e. Before attaching the bezel back on to the
front of the switch, make sure that the rubber key
pad is attached to the locating pins on the bezel as
shown in Figure #5.
RUBBER KEY
PAD
ALMOND
BEZEL
Figure #5
LOCATING
PINS
(4)