Filter
Top Products
11
®
3
W-85 Wall Control Bezel replacement: -
CONTINUED
Step 16e. To attach the bezel back on to the front of the
switch you will need to align the four (4) tabs on the bezel
with the front of the wall control and by gently pressing on
both top and bottom of the bezel at the same time, snap
the bezel back on to the front of the switch as shown in
both gures #6 and #7.
Step 16f. Re-attach the wall plate using the two (2)
almond colored head screw as shown in Figure #7, then
check your work by pressing on the light, fan, reverse
and power buttons, making sure that the buttons do not
stick and that each switch functions properly. Turn the
power back ON and test the fan and lights.
Figure #6
ALMOND
COLORED
BEZEL
ALMOND
WALL PLATE
SCREWS
BEZEL
TABS
BEZEL
ALIGNMENT
PIN AND HOLE
Figure #7
BEZEL
ALMOND
COLORED
WALL PLATE