Filter
Top Products
25
3.9.2.3 Press Menu to exit and confirm current operation.
3.9.2.4 Press again Menu to exit and close System Setup mode.
3.9.3 Remote protocol Transmitting Baud Rate setup
3.9.3.1 Press “Enter” to confirm Baud Rate setup.
3.9.3.2 Press ”▲” “▼” to choose the Baud Rate
115200576001920096004800360024001200
3.9.3.3 Press Menu to exit and confirm current operation.
3.9.3.4 Press again Menu to exit and close System Setup mode.
3.9.4 Remote protocol ID setup :
You can use RS232 remote protocal to control different DVR. ID number can be set
from 000 to be 999.
3.9.4.1 Press “Enter” to confirm ID setup
3.9.4.2 Press ”▲” “▼” to set numerical number, and press “◄” “ ►” to move digit
location x x x (3 digits)
3.9.4.3 Press Menu to exit and confirm current operation.
3.9.4.4 Press again Menu to exit and close System Setup mode.
3.10 Event
3.9.1 Enter “ Event “ list
To press ”MENU” to enter main menu. You will need
to enter password to access main menu. To press
“◄” “►” to move digit, and to press ”▲” “▼” to
select number. To press ”ENTER” button to confirm
password.
Ex.: Password : 0000 (Default : 0000)
Password : 0000
After keying in correct password, and confirm by
pressing ”ENTER” button, screen will show following
options.
Timer ------- Scheduling Record
Record ------- Record Mode Setup
Alarm ------- Alarm Mode Setup
Remote ------- Remote Control Setup
System ------- System Setup
Event -------- Event List
(Menu)
► Timer
Record
Alarm
Remote
System
Event