Filter
Top Products
18 Series LCD TV
PAGE 12
2j
1. Use the On Screen Display (OSD) menu to adjust the picture’s quality.
2. Multiple languages to choose from.
3. The time range of the menu appearance is 3~60 seconds, which can be adjusted in the
General Setting menu.
4. Use the Panel buttons or the Remote Control to operate the OSD MENU.
Using the Channel Setting Menu (For TV Use Only)
1) Press【MENU】and then use【V+】/【V-】 to select the
Channel Setting menu in TV mode.
2) Use 【P+】/【P-】to select the desired field.
Current Channel
Press 【V+】/【V-】 to increase/decrease the channel
number.
Channel Label
Press【OK】to enter the edit mode.
Press【P+】/【P-】to select the desired letter, press【V+】
/【V-】for next operation.
Color System
Switch among PAL, NTSC, SECAM, PAL M, PAL N, N4.43,
and AUTO modes.
Sound System
Switch among B/G, I, D/K and M systems.
Skip
After Auto Search, there may be some vacant and pseudo
programs received. Skipping the undesired program position can dramatically quicken
program selection.
1. When one program is preset to Skip, you will find the program skipped during programs
switch by pressing【P+】/【P-】 .
2. Input the channel number directly to watch the program again that has been skipped.
Auto Search
In the Channel Setting Menu, press 【P+】/【P-】
to select Auto Search and press 【OK】/【V+】 to
start Auto Searching mode.
1. During searching, the sound and color
systems are automatically adjusted and programs are stored.
2. When search is finished, all 236 channels are stored, or 【MENU】is pressed during
the search process, the search will automatically stop and go to the channel setting
MENU OPERATION
FUNCTION INTRODUCTION