Changhong Electric LT2618, LT3218, LT3718, LT4018 Flat Panel Television User Manual


 
18 Series LCD TV
PAGE 19
when it is one minute from SLEEP. Press any button to exit.
Recall
In TV mode, pressRECALLto view the previous channel or signal source.
In the other modes, pressRECALLto return to the previous signal source
Zoom Mode
Switch among Fill-screen, 4:3, Wide, Cinema and Subtitle modes.
Still
PressSTILLto freeze or activate the current image.
PIP/POP/PBP Function
Press to enter into or exit from the sub-picture mode. In this mode, you can realize
these functions as follows:
1. Press
to switch the sub-picture signal source among TV, AV1, AV2, YPbPr, PC and
DVI in cycle.
2. Press to switch the sub-picture mode among PIP, PBP and POP.
Mode 1: To overlap a sub-picture (PIP) in small size wherever you want to locate;
Mode 2: To place two pictures in the same size side by side. Both main picture and
sub-picture (PBP) cover half area of the display screen.
Mode 3: A main picture covers 12/16 area of the display screen while a sub-picture
(POP) covers 1/16.
3. Press
to switch between main picture and sub-picture.
4. Press to freeze or continue the current sub-picture.
5. Press
to adjust the sub-picture position on display in PIP mode.
Switches of the sub-picture’s channel can be realized by pressing CH+/CH-in TV
mode.
The sub-picture can enter into TV mode directly by pressingCH+/CH-in other modes.
Main Pic
Sub Pic
TV AV1 AV2 PC DVI YPbPr
TV
AV1
AV2
PC
DVI
YPbPr
Note: All buttons mentioned in this operation are on the remote control, signs of “” mean
that both pictures can be displayed at the same time and the blanks mean that they
can not be displayed at the same time.