Filter
Top Products
18 Series LCD TV
PAGE 18
PIP:PC
The former two-digit input number is bigger than 23, the TV would come to the
corresponding channel; If the input number is among 236 and 239, the current channel
would not be replaced.
The program is the default setting if the range is 236~239.
In AV1, AV2, YPbPr, PC, and DVI modes, press the number buttons to watch the
corresponding program.
Note: The biggest number you can input is 235 and use number buttons to input your
desired channel number. During this input operation you can change to the
corresponding channel directly with pressing 【OK】, and press【MENU】to cancel.
Volume Control
Press 【V+】/【V-】 to decrease or increase the volume continuously when the main menu
is not displayed on the screen. The range is 0-100.
The Volume menu will automatically be off if there is no operation about 4 seconds.
Mute
Press the【MUTE】on the remote control to turn On/Off the MUTE mode. Alternatively, press
【MUTE】, change the volume level to turn the MUTE off.
The
symbol will appear bottom-left corner of the screen the Mute function is
switched on. Press【MUTE】or increase the value of volume, or adjust the items of the sound
menu to exit.
The symbol is hidden when the menu operation is entered, but the feature is still
valid. It appears again when the menu operation is exited. When there is no valid signal
input, the TV will be mute (but no mute symbol) with a blue background.
Sound Mode Selection
Press【S.MODE】repeatedly to select standard, News, Music, and User modes.
The value of Standard, News, Music modes are the default setting, and they cannot be
adjusted. Only User mode can be altered.
Picture Mode Selection
Press【P. M OD E】to Switch among Standard, Mild, Bright and User modes
Information Display
Press 【 DISPLAY 】 to reveal the current signal source and its
corresponding information of Channel Number, Channel label, Color
System, Stereo/FM Mono and signal source of PIP. Characters in green on
the upper-right side display information for the main picture in TV mode
while characters in red displays the source information for the sub-picture.
Press again to exit.
Sleep Function
Press【SLEEP】to select the sleep time between
intervals of 10, 20, 30, 60, 90, 120, 180 minutes or
switch off the SLEEP function. A prompt will appear