Filter
Top Products
12
2 Menu button
Pressing the front panel Menu button will call up the menu system,
replacing the normal status display in the LCD touchscreen of the
CDT-300.
3 LCD touchscreen
Most of your interaction with the CDT-300 will be with the front panel
LCD touchscreen (and with the CDT-300’s supplied remote control).
It will usually display the information you are accustomed to seeing on
the front of most CD and DVD transports (track number, time, etc.), as
well as the basic transport controls. In addition, the touchscreen can be
used to preview videos you may be “cueing up” for friends or family, and
to navigate DVD-Audio discs’ menu systems without the distraction of
having to turn on your main video display.
By pressing the Menu button, you can also call up the menu system of the
CDT-300, which gives you control over many of the operational details
of the DVD transport, including system setup options, various display
options (including the language in which the menu system itself displays),
and several custom-installation capabilities that allow superior integration
of the CDT-300 into complex systems.
For more information, see the section e Menu System later in this
manual.
4 Eject button
e front panel Eject button operates the slot-loading mechanism of the
CDT-300. It will eject a loaded disc. ere may be a short delay prior to
ejection whilst a disc is playing, in order to give the disc time to come to a
stop.
A blue light illuminates the slot when there is no disc loaded.
5 IR window
e infrared (IR) receiver and transmitter are located behind this
window. Ordinarily, your Classé CDT-300 must be able to “see” the
remote control from this window in order to respond to remote control
commands.
If your DVD transport will be located behind closed doors, or for any
other reason will not be able to “see” the remote control during normal
operation, you may use the rear panel IR input and output mini-jacks
and an IR repeater system to solve the problem. For more information
about using an infrared repeater system to route signals to and from the
CDT-300, refer to the section Rear Panel later in this manual, or contact
your local Classé dealer.