Filter
Top Products
16
5 DC Trigger Input and Output
Many audio/video components can supply a DC control voltage to
associated equipment in order to induce desired behavior. Your Classé
DVD transport can take advantage of these capabilities in order to be
switched between operate and standby automatically, usually in concert with
the A/V preamp itself.
e
1
⁄8
th
-inch mono mini-jack Trigger In provides for remote-controlled
turn-on (that is, toggling between operate and standby) of the transport.
Two
1
⁄8
th
-inch mono mini-jacks provide individually controllable DC
trigger outputs which can be used for any of a number of purposes, as
described in e Menu System. For example, your dealer can program
Trigger Out to toggle your Classé power amplifi er between operate and
standby with your CDT-300.
e remote Trigger In will respond to the presence of 5–12VDC, with tip
polarity as shown below:
Similarly, the Trigger Outs will create a 12VDC signal that can support up
to 100mA of current.
6 Classé CAN-Bus Control Ports
ese RJ-45 connectors are reserved for future control and communication
applications using Classé Audio’s implementation of the Controller Area
Network (CAN) Bus specifi cation.
7 RS-232 Control Port
is port has two purposes:
• downloading new operating software into your DVD transport
(should new features ever be added, for example)
• external control of your preamplifi er by systems such as
i-Command
™
, AMX
®
and Crestron
™
For more information, please contact your dealer and ask about home
automation systems.