Filter
Top Products
43
5. The screen shows an error message and the Eject button does
not eject the disc (or the transport shows some other
anomalous behavior).
3 Press the Standby button so the screen dims and the blue light
goes on.
3 Using the rear panel power switch, turn off the unit for at least
thirty seconds. en turn the power back on and press Standby
to restart the unit.
6. The IR remote control seems not to function.
3 Ensure that there are no obstacles between the IR remote and the
IR sensor (located to the right of the Mute button).
3 If the batteries are weak, replace them with fresh ones.