Filter
Top Products
Stand-alone DVR Instruction Manual
176
I can not login
▶ Please check if the link LED of DVR and LAN port of PC are lit.
▶ Please check if the IP address on DVR and the PC is identical.
Check SYSTEM STATUS by pressing STATUS button of DVR
MY IP: xxx.xxx.xxx.xxx
Check Target IP Address by clicking CONF button of PC host program.
TARGET IP ADDRESS: xxx.xxx.xxx.xxx
▶ Please check whether there is a response upon PING test with DVR IP.
Type "PING -t xxx.xxx.xxx.xxx" in DOS COMMAND window and execute.
(xxx.xxx.xxx.xxx is the DVR IP)
Request timed out
→ Check IP address
Reply from: xxx.xxx.xxx.xxx : Check Port number. Check if other user is using this.
▶ Please check the Port number of DVR and PC is identical.
Check Port number at MENU-SETUP → SYSTEM → NETWORK IP CONFIG.
PORT: 5800 (on DVR)
TARGET PORT NUMBER: 5800 (on Host Program)
▶ Please confirm the Password of DVR and PC is identical.
Check Password at MENU → SETUP → SYSTEM → PASSWORD
▶ Please check whether DVR is connected another PC.
Check SYSTEM STATUS by pressing STATUS button.
FROM: xxx.xxx.xxx.xxx : IP which is presently connected.
MY IP: xxx.xxx.xxx.xxx: DVR is waiting for connection.
▶ Please check whether firewall is installed in the network.
Ask the network administrator to reconfigure the firewall.