Curtis Mathes CMC13003 TV VCR Combo User Manual


 
23
C
HAPTER
F
IVE
: S
PECIAL
F
EATURES
Viewing the
Demonstration Mode
The Demonstration Mode
displays all on-screen menus
and programmable features.
1 With the main menu on the
screen, press CH until
“VCR Setup” is highlighted.
2 Press VOL+.
The VCR Setup screen is
displayed.
3 Press CH until
“Demonstration” is
highlighted.
4 Press VOL+.
The TV/VCR cycles through
the various menus and
settings available.
5 Follow the previous steps to
turn off the Demonstration
Mode.
Using Turbo Rewind
This product features Turbo
Rewind, a high speed rewind
mechanism that allows the user to
rewind the tape in a shorter time
period than normal. (T120 tape:
within 100 seconds).
Note: The Turbo Rewind feature
works only when rewinding the
tape in stop mode.
You may experience a higher
noise level when using this
feature compared to standard
rewind.
Using True Repeat
You can set your TV/VCR to
automatically repeat a tape or a
section of tape. When you use
True Repeat, your TV/VCR will
play until it reaches the end of a
tape. Then, it will rewind to the
beginning of the tape and begin
playing again.
1 With the VCR setup menu on
the screen, press CH or
CH until “True Repeat” is
highlighted. Press VOL+ to
turn True Repeat on.
2 Press MENU twice to return
to normal viewing.
3 Insert and play a pre-
recorded video tape.
The TV/VCR will play the tape
until it reaches the end of the
tape. Then, the TV/VCR will
stop the tape, rewind it to the
beginning, and begin playing
again.
If the TV/VCR reaches an
unrecorded section of tape
before it reaches the end, it
will search forward and
check the tape again. If it
finds a recorded section of
tape, it will begin playing. If
the tape is still blank, it will
continue to search forward,
until it reaches the end of the
tape.
4 Press STOP to end the
repeat.
C
HAPTER
F
IVE
S
PECIAL
F
EATURES
AA68-00951A/eng 10/26/00 8:52 AM Page 23