Daewoo DF-4100P DVD VCR Combo User Manual


 
SETUP
2726
Initial Setup
TV Aspect Ratio
1
Use [/] to select ‘TV Aspect‘ while the ‘Video‘ submenu is
displayed.
2
Press [ENTER] or [] to go to the second level.
3
Use [/] to select the desired ‘TV Aspect’.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 LB :
Select when a standard 4:3 TV is connected. Displays theatrical
images with masking bars above and below the picture.
4:3 PS :
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
16:9 :
Select when a 16:9 wide screen TV is connected.
Auto :
Convert to the appropriate aspect ratio automatically.
Video Output
Progressive Scan Video provides the highest picture quality with reduced
flickering.
RGB :
If you connect the DVD Recorder+VCR to a analog television using
the SCART jacks, set Video Output to ‘RGB’.
Interlace or Progressive :
If you connect the DVD Recorder+VCR to a
digital television (DTV) or Monitor using the COMPONENT jacks, set
Video Output to ‘Interlace’ or ‘Progressive’.
Follow the same procedure as ‘TV Aspect Ratio’ to change the ‘Video
Output’.
Caution
Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV
or monitor. Press and hold [P.SCAN] for 3 seconds to return to Interlace Scan mode.
Video
TV Aspect Auto
Video Output Interlace
Instructions
Enter-Confirm Setup-Exit Move …†
Select Picture
Format
4:3 LB
4:3 PS
16:9
Auto
Video
TV Aspect Auto
Video Output Interlace
Instructions
Enter-Confirm Setup-Exit Move …†
Select Video
Output
Interlace
Progressive
RGB
Initial Setup
Menu/Subtitle/Audio Language
Select your preferred language for Disc Menus, Subtitles, and Audio
soundtracks.
Follow the same procedure as the OSD Language.
Default :
The disc’s default language is selected.
Language
OSD Language English
Menu Language Default
Subtitle Language Default
Audio Language Default
Instructions
Enter-Confirm Setup-Exit
Move …†
Select Menu
Language
Default
English
Spanish
French
Language
OSD Language English
Menu Language Default
Subtitle Language Default
Audio Language Default
Instructions
Enter-Confirm Setup-Exit
Move …†
Select Subtitle
Language
Default
English
Spanish
French
Language
OSD Language English
Menu Language Default
Subtitle Language Default
Audio Language Default
Instructions
Enter-Confirm Setup-Exit
Move …†
Select Audio
Language
Default
English
Spanish
French
1
Press [SETUP].
2
Use [œ/] to select ‘Preferences‘.
3
While ‘Preferences‘ is selected, press [] to select ‘Video‘.
3
Press [ENTER]. The ‘Video‘ submenu is displayed.
PREFERENCES / Video Settings
Preferences
Video
Audio
Parental Controls
Auto Settings
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†