SETUP
21
Auto Set
The HDD/DVD Recorder has a frequency
synthesized tuner capable of receiving channels
that include VHF Low E2~S6, VHF High S7~S36, and
UHF S37~E69.
Preparation:
Connect the HDD/DVD Recorder to the desired type
of antenna or cable TV system, as shown in
‘Connecting Antenna/Cable‘ on page 15.
1
Follow steps 1-2 as shown under ‘Manual Set’.
2
While ‘Installation‘ is selected, press […/†] to
select ‘Auto Set‘.
3
Press [ENTER] to begin the channel search.
The tuner will automatically search for all
available channels in your area and place them
in the tuner’s memory.
Set Clock
1
Follow steps 1-2 as shown under ‘Manual Set’.
2
Use […/†] to select ‘Set Clock‘.
3
Press [ENTER]. The ‘Set Clock’ menu appears.
4
Enter the date and time.
œ /√ (left/right): Moves the cursor to the
previous or next column.
…/† (up/down): Changes the setting at the
current cursor position.
5
Press [ENTER] to confirm your setting, then
press [SETUP] to exit the Setup menu.
After Auto Set is complete, follow the instructions
above to make sure that Tuning Band is set
correctly.
Installation
Searching for available TV stations:
5 channels found
Please wait...
Instructions:
Setup-Exit
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions:
Enter-Confirm Setup-Exit
Move
…†
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions:
Enter-Confirm Setup-Exit
Move
…†
Set Clock
Please set the clock:
Time : 13 : 00
Date : 02 \ Jan \ 2010 (Sat)
Instructions:
Enter-Confirm Setup-Exit Move …†
…
†
Setup menu
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 21 mac001 1200DPI 100LPI