Filter
Top Products
SETUP
31
If you wish, you can reset the HDD/DVD Recorder to
its original factory settings.
1
Press [SETUP].
2
Use [œ/√] to select ‘Restore Defaults‘.
3
Press [ENTER].
4
The Initialize menu will appear. Use the […/†]
buttons to select ‘Yes‘ and press [ENTER].
Restore Defaults
Setup menu
System Information
System Information helps service personnel identify
key firmware information about your HDD/DVD
Recorder in case service is required.
• Some options cannot be reset, including
Parental Controls, Password, and Country
Code.
• After Restoring Defaults, the unit is powered
off automatically. At this time, if you power on
again, the Installation menu appears. You
must set the country, language, channel, and
clock settings again.
Restore Defaults
If you select this function all
settings will be removed and
the product will be set into
initial (factory) mode.
Instructions:
Enter-Confirm Setup-Exit
Move
…†
Restore Defaults
Are you sure you want to restore
default settings?
Yes
No
Instructions:
Enter-Confirm Setup-Exit
System Info
System Version
DivX VOD
Instructions:
Enter-Confirm Setup-Exit
Move
…†
System Version
Version FD30902DXVL
Main Build 3.6.5
Micom Software 23.10.5
Loader Version BDR-B2DY
Instructions:
Setup-Exit
System Info
System Version
DivX VOD
Instructions:
Enter-Confirm Setup-Exit
Move
…†
DivX Video On Demand
Your registration code is : 6S4XBYKI
To learn more visit www.divx.com/vod
Instructions:
Setup-Exit
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and
purchase videos using the DivX® VOD service. For
more information, visit www.divx.com/vod.
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 31 mac001 1200DPI 100LPI